If you are building a suspension with a Dana 60 axle, attaching a lower control arm bracket to the short side tube for your 4 link or 3 link suspension can be a challenge, fortunately we have the solution. We designed this bracket to use the common 2-5/8 inch suspension joint mounting width and 9/16 inch bolt hole, while only needing 2-1/2 inches of axle tube length to attach the bracket. Each bracket has a built in 10° angle to help align the lower control arms to your frame rails. This bracket is CNC cut and formed from 1/4 inch thick steel. You will receive 1 offset bracket for the short side tube and 1 standard bracket for the long side.